C 80-300 purlin roll forming mill

On the machine can rolls many sizes C section in a complex roller set. Consist of power free de-coiler, leveling machine, punching unit if needed punching holes on line, forming machine, cutting device, hydraulic station, electric control system etc. Automatically punching holes and cutting achieved.

 

Main specification：

Dimension: L*H*W 7600mm，950mm,1000mm；

Machine motor power: Hydraulic power: 11KW each.

Roller steel brand: GCr15;

Machine base structure: 320 I beam structure welded;

The leveling machine: Bottom 5/ Top 4 leveling rollers;

C section thickness to be rolled: 1.5mm-3mm (Also can supply machine as per client inquiry)

C section size range: 80mm-300mm

Rolling speed: 8-9m/min；

 

Z section roll forming mill

On the machine can rolls many sizes Z section in a complex roller set. Consist of power free de-coiler frame, leveling machine, punching unit if needed punching holes on line, forming machine, cutting device, hydraulic station, electric control system etc.

 Automatically punching holes and cut to length achieved.

 

Main specification：

Dimension：10000×2400×1400mm

Electric control system: by PLC control for full machine

Main motor power：11KW

Power of hydraulic cutting ：15KW

Rolling speed：About 9m/min

Hydraulic station working pressure：18-20Mpa

Z profile size range：100-300mm

Wall thickness：1.5-3mm

 

 

Brief introduction of C/Z profile interchangeable rolling machine

 

C section, Z section each sizes rolling can be achieved full automatically size change in a minute.

Between C80-300、Z120-300, any size can be rolled with wall thickness: 1.5-3.0mm

Automatically rolls each sized C and Z profiles on a device which equip with a set of roller and in a very simple roller change way, and all actions that Auto-punching holes, forming and cutting according to preset date for products length, holes span, quantities.

 

Within 5 minutes, the C /Z profile change can be done easily in any sizes.

Operating easy, less persons working, time save and high productivity.

 

The machine consist of guiding device, leveling device, 3 sets of hydraulic hole punching devices, hydraulic cutting device, fast roller change type forming mill, electric control system, hydraulic system etc.

 

Fill forming mill line is driven by a motor with frequency convert, reducer to control rolling, cut to length, positional.

Running speed: 20m/min.

 

Main specification

    1）The profile wall thickness：3mm Max.

    2）Adjustable distance for punching holes in cross: 40~300mm

    3）Total motor power: 25KW

    4) Max. forming speed: 20m/min

    5) Hydraulic cutting device:

Input work piece length data, encoder measuring length, stop mill to cut off by hydraulic cutting device.

    1. Mill line dimension: 9690×1200×1450（mm）

    2. Running speed：About20m/Min.

    3. Forming stands numbers：19+3=22

    4. Roller steel brand: GCr15 (D2);

    5. Roller hardness：HRC58o—62o

    6. Shaft steel brand：1045

    7. Shaft diameter：Φ70

    8. 212 Bearing: deep groove ball bearing 212

    9. Rolling profiles：C80--300# Z120--300#

    10. Motor power：22KW

    11. Hydraulic motor mode: YLM16-3000